Next Generation Energy-efficient power-saving humidification fans
Humidification fan and dehumidification fan used to maintain the humidity of the required area.
Humidification fan used to increases humidity and dehumidification fan used to reduce the level of humidity.
These dehumidification and humidification fans have to operate in the environment containing an access amount of moisture. and because of this moisture either fans suffer from low efficiency due to corrosion on its surface or need high-grade Stainless Steel which is very costly. Moreover, all the metallic fans are not able to adopt today’s most efficient profile because of the manufacturing process limitation of complicated fan geometry.
Thus the introduction of fiberglass composite material and ease of processing helped designers of humidification fan and dehumidification fan to adopt more efficient profiles with the best distribution of dehumidification and humidification fan blade chord and twist, which are difficult to generate hollowness in metals. Owing to this fact hollow bladed FRP fans are being adopted for various applications including dehumidification and humidification fan.
Advantage of using FRP material in dehumidification and humidification fan:
Operating Economy: – High strength to weight ratio of FRP blades and their best Aerofoil section allows humidification fan and dehumidification fan to deliver the same airflow at lesser power.
Low noise level: – FRP blades have batter surface finish that reduces resistance to the floating air on its surface which lessens noise level of humidification and dehumidification fan.
Corrosion Resistance: – The blades are corrosion resistant even in contaminated conditions that assure trouble-free service over a long period of time.
Standard features of Maya humidification and dehumidification fan:
· Higher efficiency:- In humidification and dehumidification fan we not only accept the challenge of power-saving against metallic humidification and dehumidification fan (around 15 to 25%) but we are also pleased to take the challenge of providing power saving against other humidification and dehumidification FRP fan manufacturer (around 10 to 12%).
· Excellent surface finish amongst the entire metallic humidification and dehumidification fan available in the industries.
· Excellent corrosion resistance with consistent performance even after a long time of operation.
· Largest operating Temperature 200° F with normal resin (Fireproof option is also available).
· Light and Strong: Mayafan humidification and dehumidification fan blades made of fiber which is light in weight and strong.
Maya humidification and dehumidification fan also include:
– Variable and non-variable pitch axial flow humidification and dehumidification fans.
– Maya fans offer humidification fans and dehumidification fans range from 2 to 10 feet.
– Maya humidification and dehumidification fans assemblies are dynamically or statically balance as per ISO 1940, balance quality grade 6.3
– Fans are dynamically balanced on Micro Processor Controlled hard bearing Dynamic Balancing Machine.
FAN DIAMETER IN MM
Up to 35% power saving
AIR FLOW UP TO (CMS)
NUMBER OF BLADES UP TO
FRP Humidification fan has the following advantage-
Long Life of fan.
Low operating noise.
Good Performance in all weather conduction.
Very low payback period in case of replacement of existing fan.
Freedom in the aerodynamic design of FRP fan blades achieves higher efficiency.
Reduction in the weight of FRP fan assembly provides extended life of a mechanical drive system.
Low power consumption resulting in appreciable energy savings.
Ease of FRP fan handling and maintenance.
Lower flow noise and mechanical noise levels compared to conventional metallic fans.
FRP fan has excellent corrosion and erosion resistance.
Zero Cost Solution for power saving opportunity.
Why choose Maya Humidification fan?
Low Operating Costs
-
Maya High efficient airfoil blade design.
-
Optimization of twist cord and cross-section provide maximum efficiency.
-
The involvement of advanced composite material. It reduces turbulence and produces smooth linear airflow.
-
Best design for the duty point No overdesign of the fan.
Long Life Construction
- Most of the part made of Heavy-duty composite and hot-dip galvanized material. It meets the corrosion resistance and equipment life requirements. For most demanding heavy industrial applications while still delivering an outstanding value.
- Lightweight impeller, thus, increases in the life of all the mechanical components.
- Humidification fans are also available with Series 300 stainless steel as an optional upgrade. This comes with a 5-year limited warranty.
- Maya Humidification Fans manufactured in ISO-2015 certified facilities.
Fast emergency response.
- Ready-made fan available.
- The minimum stock of the fan spare maintained.
- Low manufacturing leads to time because of zero outsourcing.
- The expert team available for fan installation.
Quiet by Design
- The composite blade has a glossy surface finish that offers smooth airflow.
- Low tip speed design (Nose are directly proportional to tip speed).
- No outsourcing full quality control thus achieves minimum tip clearance.
- Special design available for extra low noise fan which can reduce noise up to 10 dba compares to conventional fans.
Performance for All Seasons
The fan is a constant flow machine and to maintain its performance despite critical variation in weather. Maya Humidification fans designed for a broad range of operation. Our fan having a reserve margin for both airflow and static pressure. And this help fan to deliver performance throughout the year in all type of seasons.
Low Maintenance/Less Downtime
Maya FRP Humidification fans made of high-quality material and robust design.
Maya design fans for low operating tip speed which increases system life and also reduces the chance of failure.
Unlike painted fans. We do provide a permanent coating of a gel coat that remains an integral part of the fan blade. And does not get separated due to erosion.
FRP Humidification fan construction
Here is the list of Maya Humidification fan component with a there brief detailing
Fan Blade
Maya Humidification fan blade made of the latest airfoil. These are similar to an aeroplane wing. We do choose the most advanced airfoil possible for the fan to provide maximum efficiency. And we achieved superior performance. Our blade is very robust in construction and designed for 7-10 times of operating load. We also provide superior wear resistance material to maintain surface stability.
This FRP Humidification fan blade is having some of the very charismatic property. It is very much possible to produce any complicated shape with ease. Thus provide economical solution some of its special features are and listed below –
- High strength at low weight.
- Good impact, fatigue, and Tensile Strength (Ultimate)
- Excellent environmental resistance.
- Excellent chemical and corrosion resistance.
- Superior surface finish.
- Better life of the entire fan system due to low assembly weight.
- Low moment of inertia help for the selection of optimum motor and reduce over design due to higher starting torque. Thus motor operates under a better range of efficiency.
Fan Hub / Boss
Hub used in Humidification fans is heavy in construction. We are using heavy thickness mild steel plate, cast iron, or Aluminum clamp and stainless steel hardware to provide long life. We are coating all mild-steel part with heavy thickness of zinc. Note – Optionally we also provide customize hub/Boss on special demand of the customer, like caste hub boss, Spider Type Fabricated hub, etc.
Key Feature
- Heavy-duty MS fabricated.
- Hub is dynamically balanced as per ISO 1940 grade 6.3 or 2.5 if required.
- The individual part of the hub is moment balanced.
- All the MS part are hot-dip galvanized Option for different grades of ss plate is also available.
- Nut bolt used are of coated HT or stainless steel series.
- For sea weather application Solvent Free, Self-levelling Coatings are available.
Taper Locking
in most of our fan, we preferred to have a taper locking arrangement which is proven in the field these taper lockings are mostly made of Cast iron or stainless steel.
AERODYNAMIC HUB
It made of E-glass anti-static fibre, having UV protection, it is available in the segment for ease of transportation.
- This used to maintain laminar airflow at the centre of the fan and avoid eddies generation.
- It is having a high surface finish for smooth airflow.
- It is having anti-static properties.
- It seals the fan circuit and avoids air recirculation.
- It gave freedom to reduce the mechanical hub dimension.
PRESTIGIOUS CUSTOMER
Frequently Asked Question
Why Humidification fan replacement cost is high ?
The old casted fan just comes at the rate of casting whereas FRP fan needed very much effort. Though the initial cost may be higher. But with these improved tea withering fan operating cost will reduce very much. We can achieve up to 3-10 month payback period.